Trimmed Two Side Edge Online Crusher is mainly used with extruder(sheets, sheet  metal  etc.).Trimmed two side edge will  be produced  from  extruder  during the production.In order to keep the clean and dry of trimmed two side  edge,it  will  be  compacted  and  entering  into  the  crushing room by traction unit.And  then  they  willto  be  flake  pellets.In  the  last,these  crushing  materials  will  be  into  the   hopper  of  extruder by blower  or  suction  feeder.New   raw  materials  and   recycling  materials  will be  re-use  by  small  screw  and   main screw.Or they will  be  into  the  mixer  to  mix  by  blower  or  suction  feeder.It  is  achieve to 100%recycling.In   production process,the  crusher  is  achieve  to  saving cost,improving production process,and improving the production environment.The best  effect  is improve the traditional productivity and products quality.

I.  Traction unit:

1)The power parts are equipped with gear reducer motor from famous brand.It is convenient,durable and stable quality.

2)The rollers of traction unit are precision working from high-strength seamless steel tube,and then plate hard chrome for solidity and anti-rusty.It is elegant appearance and follow environmental protection.

3)The body of traction unit are precision machining from GB steel,and then plate hard chrome for solidity and anti-rusty.It is elegant appearance and follow environmental protection.

4)Possibility to synchronize traction unit speed with production line.

Ⅱ.Crusher:

1)The knives of machine is famous special steel.It is high hardness,strong wear-resistance and good toughness.And it is especially durable,and high crushing ability to easily crush all kinds of soft and hard materials.

2)The tool carrier is designed with hollow structure,which is to stably run,small wind-resistance,radiate fast and durable.

3)The body of machine are welded from high-strength GB steel,It is durable.

4)The stander are welded with GB U-steel and fixed with screws to keep the stability of machine.

5)The bearing with famous brand is stable and durable.

6)The pulley are casting and precision machining.It is durable.

7)The bottom of machine is equipped with foot shock,can actively adjust the balance of machine.

8)The  cabinet  of  machine  is  designed  with  soundproof  cottton.So  the  noise  is  low  when  working,which  meets  the  requrementsof  environmental  protection.

9)Within thickness:0.2~3.5mm of materials can be crushed.The special thickness of materials shallbe noted.

Ⅲ.Blower:

1)The base of blower are designed with GB angle bar.And th motor is from famous brand to ensure quality.It is environmentalprotection,health and durable.

2)The cover and blades of blower are welded with stainless steel,which is never rust,environmental protection and durable.

3)The special design of blade of blower increase the pressure to achieve the good effect.